How To Store Bikes In The Garage To Create More Space

By: Mr Handyman of The Woodlands | Published 07/22/2020

Linkedin

Bikes can take up a lot of space in garages, particularly if you own more than one. The good news, though, is that by hanging your bikes you free up a lot more space in your garage. In this article, we’ll show you how to hang and store bikes in your garage.

Here are three benefits of storing and hanging your bike effectively:

You can fit more in your garage.
You have easy access to your bikes and can bring them down and hang them up easily.
You minimize the chances of damage occurring to your bikes, as they are out of the way of most hazards and won’t be knocked or run over.
HOW TO HANG BIKES IN YOUR GARAGE:
Now let’s take a look at how you can install bike hooks so that you can hang bikes in your garage.

Here’s what you’ll need:

One or two C-shaped bicycle hooks with screw-in ends
A measuring tape and pencil
An electric drill or screwdriver
A stud finder
A stepladder and a pair of pliers/hand wrench
Once you have all the equipment you can begin installing your hooks:

The first thing you’ll need to do is measure the distance between both of the axles on your bikes’ front and back wheels and measure the dimensions of your bikes’ handlebars. When you have these measurements, locate any concealed studs in the garage wall or ceiling. The best way to do this is to use a stud locator.

Using a stud locator is pretty easy and on most models all you’ll need to do is switch the stud locator on and locate a stud edge. You can place the bottom of the stud locator on the wall and slide right or left until the finder signals a stud edge and mark the location with a pencil. If you’re looking to install two hooks, then you’ll need to locate another stud at a distance equaling the bike wheel measurements you’ve determined.

Use a drill or screwdriver to drill a pilot hole at each pencil mark; these holes will need to be the same width as the hooks screw end.

After drilling the holes, you can screw in the bike hooks into the holes – you should be able to do this by hand, but if the hook needs tightening at all, then use a wrench or pliers if necessary. Make sure both hooks are facing the direction you want the bike to hang.

Now that your hooks are in place, you can hang up your bike. Flip the bike upside down, so the wheels are facing upright, and slowly and carefully hang your bike from the hooks.

And there you have it! Once your bikes are hung up in your garage you can enjoy more room for all your other essentials.

EXPERT HELP WHEN YOU NEED IT
If you’re in need of any help installing bike hooks in your garage, or any other home repair or handyman services, your local Mr. Handyman is here to help. Call our team today at (877) 685-1377 or request an appointment online.

Looking for more tips on how to organize your garage? Molly Maid can help! Molly Maid is part of Neighborly’s trusted network of home service providers.

July 21, 2020
By Mr. Handyman

Comments •
Article Categories
X
Log In to Comment